xBee Carrier Boards
These carrier boards allow you to use xBee® compatible modules to easily send telemetry, commands, control gains, and other data between the remote Lisa/M or Lia autopilot in your vehicle and a ground station computer. We offer two models of carrier board.
Serial xBee Carrier Board
The serial board is meant to interface with the Lisa/M or Lia autopilot; it features a Picoblade socket for easy connection to Lisa or Lia, and its mounting holes are compatible with the Quadshot mount points. The required four-pin to four-pin Picoblade cable is included.
USB xBee Carrier Board
The USB carrier board has an onboard FTDI chip and mini-USB plug for simple connection to your computer. It also has 0.1" header pins and selectable 3.3V/5V modes to allow it to be used easily with a variety of autopilots, custom projects, etc.
PLEASE NOTE xBEE MODULES ARE NOT INCLUDED. Please check the links below for compatibility information.
Documentation and More Info
xBee module compatibility information on the Quadshot Wiki
Carrier Board installation instructions in the Quadshot Assembly Manual